OVERVIEW

The XPSATE safety relay from Schneider Electric’s Preventa range has now been replaced by the XPSUAT model. This upgrade is important for those working with dying machinery spares and industrial automation spares, as it helps keep machines safe and operational.

The original XPSATE relay, used for emergency stop controls and safety switch monitoring, is now obsolete. The recommended replacement, such as XPSUAT13A3AP, offers updated technology and meets the same high safety standards while providing improved reliability. It ensures protection for both workers and machinery by quickly stopping equipment when needed.

For owners of older machines, switching to the XPSUAT means they can continue using their equipment without replacing entire systems. Genuine Preventa XPSUAT relays are available through industrial automation spares suppliers and machinery spare parts dealers.

When replacing the XPSATE, it is important to choose the correct XPSUAT model for compatibility. More details, including specifications and wiring, can be found from trusted suppliers or directly from Schneider Electric’s support and datasheets.

SPECIFICATION

Safety Level:

Can reach Performance Level e (PL e), Category 4 for normally open relay contacts (ISO 13849-1).

SIL 3 (IEC 61508) and SILCL 3 (IEC 62061) for normally open relay contacts.

PL c, Category 1 for normally closed relay contacts.

Power Supply:

Supports 24 V AC (-15%…+10%) and 48 to 240 V AC/DC (±10%).

Nominal input power: 6.5 VA (24 VAC), 10 VA (240 VAC), 3 W (24 V DC), 4 W (48 V DC).

Relay Outputs:

3 normally open instantaneous contacts.

3 normally open delayed contacts.

1 normally closed delayed contact.

Max continuous current: 6 A (NO), 3 A (NC).

Inputs:

2 positive supplied safety-related inputs.

1 negative supplied safety-related input.

Timing:

Adjustable delay times for safety-related outputs ranging from 0 to 900 seconds or more.

Maximum response time: 20 ms.

Recovery time: 200 ms.

Mechanical Dimensions:

Width: 45 mm

Height: 99 mm (without terminals)

Depth: 117 mm

Weight: Approximately 0.35 kg.

Electrical and Mechanical:

Rated impulse withstand voltage: 4 kV.

Protection rating: IP40 housing, IP20 terminals.

Wire connection by removable screw terminals for 0.2 to 2.5 mm² wires.

Additional Specifications:

Stop categories 0 or 1 for emergency stops.

Hardware Fault Tolerance (HFT): 1.

Safe failure fraction (SFF): > 99%.

Mean Time To Dangerous Failure (MTTFd): >30 years.

Average Diagnostic Coverage: ≥ 99%

FEATURES

The XPSUAT safety relay from Schneider Electric’s Preventa range offers advanced features for dying machinery spares and industrial automation spares. Designed as the replacement for the former XPSATE module, this device ensures modern safety and reliability for your machines.

The XPSUAT relay supports up to seven safety outputs and three safety inputs for monitoring emergency stop buttons, guard door switches, and light curtains. It works with either 24V AC/DC or 48–240V AC/DC, and you can choose models with spring or screw terminals for installation. Its universal nature means it can replace older units while fitting into most industrial settings.

The safety relay includes configurable start functions, diagnostic outputs, and compatibility with extension modules to increase output if needed. It meets high safety standards, offering Category 4 and Performance Level e (PL e) according to ISO 13849-1, to protect both workers and equipment. Robust in design, the module delivers reliable interruption of dangerous currents during emergencies, helping keep machinery safe.

For easy sourcing, check with trusted industrial automation spares dealers or Schneider Electric for datasheets and technical support.