Linear Position Transducers

LTM Series 

The LTM Series, which is easy to use and install, is the most
used model of the industry. It is used to measure linear
movements with one-sided actuating rod.

LTP Series

The most important feature of the LTP series position sensors
is that they are articulated on both sides. Thanks to the joints,
they are capable of angular movement up to max. 30 ° during
mounting and operation.

LTC Series

The most important feature of the LTC series position sensors is
that they are articulated on both sides. Thanks to the joints, they
are capable of angular movement up to max. 30 ° during
mounting and operation. In these models, the socket is 90° to the
body.

LTK Series

The most important feature of LTK series position sensors is that
they have a rodless and sliding system. They take measurement
by movement of the sled along the profile. This provides the body
to be shorter and allows up to 1500 mm stroke length.

LT Series

The most important feature of LT Series position sensors is that they are used in confined spaces due to their small size.
They work as ABSOLUTE because they are measuring with the potentiometric principle, that is, they do not lose their position in
case of power off. Potentiometric, 4-20 mA (optional 0-20 mA) or 0-10V analog output options are available.
Because of their linearized conductive plastic resistance alloy and special contacts, they are not affected by wear and operate
for a long time with a life cycle of up to 100 million. They are stable by being linear and they measure evenly.

LTR Series

The most important feature of the LTR Series position sensors is the push-back spring.
They work as ABSOLUTE because they are measuring with the potentiometric principle, that is, they do not lose their position in case
of power off. Potentiometric, 4-20 mA (optional 0-20 mA) or 0-10V analog output options are available.

LF Series

On the LF series position transducers, the movable shaft does not protrude from the rear of the transducer. In this way, it can be
easily installed in confined spaces.
They work as ABSOLUTE because they are measuring with the potentiometric principle, that is, they do not lose their position in
case of power off. Potentiometric, 4-20 mA (optional 0-20 mA) or 0-10V analog output options are available.

LFR Series

LFR series is the industry proven system on both actuator shaft and spring. There are 2 types, which are mounting from the body and
mounting with a nut from the front.
They work as ABSOLUTE because they are measuring with the potentiometric principle, that is, they do not lose their position in case
of power off. Potentiometric, 4-20 mA (optional 0-20 mA) or 0-10V analog output options are available.

LFM Series

LFR series is the industry proven system on both actuator shaft and spring. There are 2 types, which are mounting from the body and
mounting with a nut from the front.
They work as ABSOLUTE because they are measuring with the potentiometric principle, that is, they do not lose their position in case
of power off. Potentiometric, 4-20 mA (optional 0-20 mA) or 0-10V analog output options are available.