PNEUMAX

Valves and solenoid valve manifolds

Series 2700 – ISO15407-2

The 2700 series of solenoid operated valves conform to isO 15407, a standard for both pneumatic and electrical layout.
This series of valves have a 27mm valve body width and a nominal flow rate of 1000 NI/Min.

Series 2700 – Serial systems

The 2700 series in the serial version can be interfaced with the main communication protocols:

– CANopen
– Profibus-DP
– PROFINET IO RT
– EtherCAT
– EtherNet/IP
– DeviceNet

Series 2300 ENOVA®

Technical innovation, rational design, high performance and extremely compact size: these are the main features the ENOVA® series bring to the market.
Each valve comprises all the necessary pneumatic and electrical functions needed to produce a solenoid valve assembly.

Series 2300 ENOVA® – Serial systems

CANopen® module is directly integrated on Enova solenoid valves manifold via a 25 poles connector, normally used for multipolar cable connection.
Enova solenoid valves connected to node must be PNP equivalent (final 02 in ordering code).

Series 2200 Optyma-Sc

Optyma solenoid valves series it’s completed by “Compact” version. It is useful in case a limited number of solenoid valves is needed without managing input and output signals.
standard base blocks provide 4 or 6 solenoid valves positions. standard base blocks can be individually sold even without solenoid valves to allow maximum configuration flexibility.

Series 2200 Optyma-S – Serial systems

CANopen® module is directly integrated on Optyma-S solenoid valves manifold via a 37 poles connector, normally used for multipolar cable connection. Optyma-S solenoid valves connected to node must be PNP equivalent (final 02 in ordering code).
The node can be easily installed also on solenoid valves manifold already mounted on equipment.

Series 2200 OPTYMA-S

Optyma32-S has been designed in order to complete the Optyma series of valves.
Optyma–S,12.5mm size, integrates all the technical features already developed and implemented on the Optima t & F such as the integrated electrical connection. 

Series 2500 Optyma-F – Serial systems

CANopen® module is directly integrated on Optyma-F solenoid valves manifold via a 37 poles connector, normally used for multipolar cable connection. Optyma-F solenoid valves connected to node must be PNP equivalent (final 02 in ordering code).
The node can be easily installed also on solenoid valves manifold already mounted on equipment.

Series 2500 OPTYMA-F

The solenoid valves base mounted line including electrical connection into the manifold. Many technical features make the new product interesting:
– Flow rate of 1000 Nl/min
– Low consumption coils placed all in one side of the valve
– Quick mounting of the valve to the base using just one screw
– Quick connection of the bases thanks to 180 degree rotating pins
– Possibility to use different pressures along the manifold (including vacuum)
– IP65 environmental protection

Series 2500 Optyma-T – Serial systems

CANopen® module is directly integrated on Optyma-T solenoid valves manifold via a 37 poles connector, normally used for multipolar cable connection. Optyma-T solenoid valves connected to node must be PNP equivalent (final 02 in ordering code).
The node can be easily installed also on solenoid valves manifold already mounted on equipment.

Series 2500 OPTYMA-T

With the introduction of the “T” configuration of solenoid valves with integrated pneumatic connections fitted directly on the sub base the 2500 series (called OPTYMA) is now richer than ever.
Many technical features make the new product interesting:
– Flow rate of 800 Nl/min
– Tie rod system to hold the sub bases together
– All pneumatic connections (push-in) on the same side of the manifold
– Quick mounting of the valve to the base using just one screw
– Possibility to replace the valve without the need to disconnect the connections
– Possibility to use different pressures along the manifold (including vacuum)
– IP65 environmental protection

Series 3000 – TG 10 mm (3100)

Pneumax valves and solenoid valves are designed to guarantee versatility and maximum reliability in the control of integrated pneumatic circuits. The Pneumax 3000 series of solenoid valves is a very flexible solution that can be easily configured to optimize the efficiency of the whole system through a constant interface and communication with the machine.

Series 3000 – TG 15,5 mm (3400)

Pneumax valves and solenoid valves are designed to guarantee versatility and maximum reliability in the control of integrated pneumatic circuits. The Pneumax 3000 series of solenoid valves is a very flexible solution that can be easily configured to optimize the efficiency of the whole system through a constant interface and communication with the machine.

Series 3000 – Serial systems

CANopen® node handles up to 64 inputs and outputs, both divided into 8 bytes. Output typologies include solenoid valves, digital outputs (e.g. 5130.08.M8) and analog outputs (e.g. 5130.2T.00). Connectable inputs typologies include digital inputs modules (e.g. 5230.08.M8), analog input modules (e.g. 5230.2T.00), and Pt100 inputs modules (e.g. 5230.4P.02). Optional modules can be connected to the manifold in any order and configuration, provided that modules are installed starting from the node and optional position modules left to furthest end.

ACCESSORIES

Series 600

These accessories are a range of devices for completing a pneumatic circuit. these valves, with their special functions, are inserted between two valves, between a valve and a cylinder, or following a cylinder.
One of the particular characteristic of these accessories is that they are automatically actuated without the need for external commands. usually, operation and idle are controlled by the presence or absence of pressure as, for example, in the case of quick exhaust valves which pilots itself as a selector, changing the flow direction as the signal goes off and on.

Series 900

The 900 series consist of the following components:
– Pressure switch, which transforms a pneumatic signal into an electric one.
– impulse generator, which transforms a permanent pneumatic signal into an adjustable impulse from 0 to 10 seconds.
– Pneumatic timer (n.C. or n.O.), which cuts or releases a pneumatic signal within an adjustable time.
– Two hands safety valve, which allows a safety use of two hands pneumatic controls (for example two push-button 3/2 N.C. to a certain distance) excluding false signals in case of push-button or valve malfunction.
– Flip – Flop: 5/2 ways valve, single signal actuated, commutes the outlet from 2 to 4 and vice versa at each puls.
– For a correct functioning it’s important that inlet pressure be the same or lower than pilot pressure.
– Oscillator valve, 5/2 – G 1/8″ with two logic functions “NOT” mounted on board, switches when the pressure in the connected cylinder exhaust chamber is reaching the threshold of “NOT”.
– Signal amplifier, 3/2 – G 1/8″ N.C. valve actuated by weak signals but higher than 0.05 bar.

Series 50-T50

The blocking valves are used to maintain pressure in the downstream part of the pneumatic circuit even when the pressure supply is shut down.
Blocking valves are normally assembled directly on cylinders ports in order to maintain the position even in cases of accidental loss of the pilot pressure by preventing a sudden loss of pressure in the cylinder chambers.
Unidirectional and bidirectional version are both available.
The unidirectional version allows free air to flow in one direction while requires a pneumatic signal to allow air flow in the opposite direction.

Series 55 Tecno-FUN

This line of different logic functions that can be used in any place of the secondary pneumatic circuit, developed to be installed directly onto the main pneumatic components (distributors or cylinders).
Thanks to the modular design it is possible to easily join together multiple logic functions without the need of using pipes to connect them; it is also possible to choose the type and style of each connection. The connections available are the following: straight cartridge; Banjo PL cartridge; male cartridge threaded 1/8” or 1/4” and female cartridge threaded 1/8”.
Function fittings can also be assembled side by side in order to be assembled on the din En 50022 rail (using the relevant kit).

Series 1750 – 1760

This new type of miniaturised pressure regulators are mostly indicated for the use on the secondary level of the pneumatic circuits. Thanks to the contained dimensions are particularly indicated to be used very closely or directly mounted onto the consumption.
Three versions are available:
– Version rod G1/8″ swivel ring with female thread G 1/8″ and G 1/4″ or push-in fitting for tube Ø4, Ø6 and Ø8
– Model with body in technopolymer integrated gauge and quick coupling fittings for tube Ø4 and Ø6

Series Mini-RAP

Technical data
Working temperature: -20°C +70°C
Maximum working pressure: 10 bar
Fluid: Compressed air (others fluids on requests)
Nichel-plated brass body, brass grip, silicone free nbr gaskets
Thread: Cylindrical with O-ring
Maximum fixing torque for fittings
Thread: M3: 0,4 nm
Thread: M6 and M6x0,75: 1,3 nm

ISO 5599/1 VALVES AND SOLENOID VALVES

Series 1000

5 ways 2 or 3 positions distributors and electric distributors can be used mounted on individual or ganged bases.
These standards are ISO 5599/1, according to which certain dimensions are mandatory, namely, the mounting surface, the pitch of the fastening screws, the characteristic of the electric pilot, the flow rate, the pneumatic connections, and so on.
The design is based on the balanced spool principle with pneumatic or electropneumatic actuators and resetting by mechanically or pneumatically operated spring.

Series 1000-M12

The ISO 5599/1 Solenoid valves Series 1000 M12 are available in three sizes with flow rates from 900 NI/min for size 1 up to the 3600 NI/min for size 3.
the standard features of the isO valves are still included, however, they are now combined with a M12 electrical connector located in the middle of the valve to manage the electrical signals.
Versions are available to suit valves with both single and double 24VDC solenoids complete with IP65 protection.
All version are supplied with LED indicators.

“NAMUR” VALVES AND SOLENOID VALVES

Series 514/N

The 514/N solenoid valves, are 2 stage valves actuated electro-pneumatically. A series 300 directly operated solenoid valve actuates pneumatically the principal power distributor.
Everything is well integrated in a practical configuration that also permits applications where there is limited space. used primarily to operate rotary actuators and wherever there is a NAMUR standard installation plan.

Series 514

NAMUR valves are 5/2 and 4/2 valves and electrovalves, piloted electrically or pneumatically, utilised primarily to operate rotary actuators and wherever there is a NAMUR standard installation plan.
The product is classified for use in potentially explosive atmospheres (Directive 2014/34/EU).
NAMUR valves have been developed using the latest, technical design solutions which guarantee flexibility and an increased flow rate capacity exceeding that of traditional, spool valves.

Series 515

NAMUR valves are 5/2 and 4/2 valves and electrovalves, piloted electrically or pneumatically, utilised primarily to operate rotary actuators and wherever there is a NAMUR standard installation plan.
The product is classified for use in potentially explosive atmospheres (Directive 2014/34/EU).
NAMUR valves have been developed using the latest, technical design solutions which guarantee flexibility and an increased flow rate capacity exceeding that of traditional, spool valves.

Series T514

TECNO-NAMUR are 5/2 and 4/2 valves are solenoid valves pneumatically or electrically actuated. They are used in industrial automation applications or whenever a NAMUR mounting plane is available.
Is available in 5/2, 4/2 and all-purposes versions. The final user can switch from one version to another by simply changing interface plate and adding/removing a plug.

POPPET VALVES AND SOLENOID VALVES

700 Series

The large flow valves and solenoid poppet valves for compressed air and vacuum.
Are manufactured for 3/2 and 2/2 versions only, either normally close and normally open.
For the compressed air oparation, the application is similar to the equivalent spool valves while for the vacuum operation a particular attention should be paid to the valve selected and its connection to the pump.

N776 SERIES

The N776 G1.1/2” series of valves and solenoid operated poppet valves is the result of the technical evolution of the 776 series.
A rolling diaphragm construction has replaced the previously used piston design ensure lower frictions and longer life. Connection 3 is isolated via a dedicated seal which allow to have the n.O. version as well as the self feed for vacuum which was not available on the 776 series.
The pilot valves are the M3r (CnOMO stile) with bistable manual override.

T771 SERIES

The range of G1” pilot and solenoid operated poppet valves represents an evolution of the current popular Zama series and of the series T772-T773 (G1/2″-3/4″).
Also for this series the main feature is the technopolimer material used to mould most of its components.
The use of this materiel results in a versatile, lightweight and economical valve.

PVF Series

SERIES T772-773

The range of G1/2” and G3/4” pilot and solenoid operated poppet valves are manufactured with high impact resistant thermoplastic.
The use of this materiel results in a versatile, lightweight and economical valve.
The traditional piston lip seal has been replaced with a rolling diaphragm, thereby eliminating frictional wear and tear to this seal.
The valves (with the exception of certain vacuum models) also features a seal, which separates port 3 from the piston head. the inclusion of this seal has enhanced the valve’s performance and allows the valve to be used as normally open (a configuration not possible in the Zama series).

F300 SERIES

PNEUMAX offer a vast range of solenoid valves in brass and stainless steel designed to control air, water, steam and all fluids that are compatible with the materials (body and seals) used in the range. The solenoid valves are 2 or 3-way, normally closed, normally open, general service, direct acting or servo-actuated, with connections available in NPT & BSP threads from G1/8” up to G2”, with a working pressure range from vacuum to 100 bar. Solenoid valves are available with coils that conform to CESI 03 ATEX 344 certification for explosive environments. Our technical office ensures the highest standard of skill and understanding for the widest variety of applications, ensuring that the best possible solutions are found.

PVA Series

Pad Valves offer a reliable and economic solution to fluid control. The valve is manufactured with a 2 way Bronze body and actuated pneumatically using either a single or double acting compact cylinder which can be rotated 360°.
Versions are available with NBR, FPM or PTFE valve seals.
The barrel profile allows the use of magnetic sensors code “1500._” , “RS._” , “HS._”, for slots “A” type.

DIRECT OPERATED SOLENOID VALVES

300 Series

The direct operated solenoid valve is the interface between pneumatic and electronic. In fact, it is actuated by an electrical signal and in turn gives a pneumatic signal directly available for small users or for actuating bigger pneumatic distributors.
A wide range of valves are needed for satisfying various applications. For this need we have available miniature components with very low volume and electrical impute as well as solenoid valves with large flow rate and power for heavy duty operations. These solenoid valves are usually 3/2, normally closed or normally open, but there are available the 2/2, closed or open, for vacuum and others.

COILS

Series M (Mechanical)

SERIES CNOMO

SERIES S

300-UL Coils

UL COILS

SPOOL VALVES AND SOLENOID VALVES

104 SERIES

New 104 micro valves series have been realized as an economic version to complete the range of 105 valves version. With their small overall dimensions it makes easy installation and operation.
Their main characteristic is the possibility to choose between the version with lateral or rear pneumatic connections realized with quick fitting for Ø4mm tube included.
the valves are available with 2 or 3 ways versions, normally closed or opem, 5 ways and 5 ways 3 positions open centres and pressured
centres.

105 SERIES

The series 105 consist of a broad range of miniature valves and valves with various type of actuation.
The connections are M5 for this series.
Due to their special construction with a balanced spool, these valves can be used interchangeably as 3 ways or 5 ways as can be seen in the functional schematics in section 0.
This is important because, for example, the 3 ways can be used normally closed or normally open and the 5 ways can be fed through the exhausts 3 and 5 with different pressures according to the need.

200 SERIES

The series 200 consist of a broad range of valves with various type of actuation.
The connections for this series are from G 1/8″ to G 1″.
Due to their special construction with a balanced spool, these valves can be used interchangeably as 3 ways or 5 ways as can be seen in the functional schematics in section 0.
This is important because, for example, the 3 ways can be used normally closed or normally open and the 5 ways can be fed through the exhausts 3 and 5 with different pressures according to the need.

T200 SERIES

The T200 series, consist of a broad range of valves with various type of actuation. The connections for this series are from G 1/8″ to G 1/4″. the main components constituting the valves of the tecno228 series are manufactured with high performance technopolymer.
The use of technopolymer has resulted in a light weight product which can be offered to the market at very interesting prices.
The T228 series, is manufactured with 1/8” connections, 3 and 5 ways function, mechanical or pneumatically operated, monostable spring or pneumatic return, bistable and in 5 ways 3 positions version with closed, open and pressured centres.

800 SERIES

The trend towards the miniaturization of components has been consolidated. the use of new technologies makes it possible to manufacture components with high flow rates but extremely compact sizes.
Electric piloting is by means of low-absorption miniature solenoids which are easily connected to the electronic control systems of machines (PLC).

T400 SERIES

The series T400 involves a wide range of Valves and Solenoid valves, with several type of acting, with connections from G1/8″ (T488) and G1/4″ (T424), are manufactured with high performance technopolimer.
The use of technopolymer has resulted in a light weight product which can be offered to the market at very interesting prices.
The gang mounted solenoid valves are available with the traditional manifold obtained from bored square bar of series 600 and with the extruded aluminium base allowing a unic inlet port conveying the exhausts. The base is also prearranged to be fixed on DIN 46277/3 guide.

SERIES 2100 LINE-FLAT-BASE

This solenoid valves series has been developed to meet requirements for electronically controlled pneumatic systems and / or serial control systems already used in all manufacturing sectors.
They have been designed to be easily assembled into groups or manifolds and include integral electrical connection to facilitate simple and speedy integration into a control system.

SERIES 2400 LINE-FLAT-VDMA

This solenoid valves series has been developed to meet requirements for electronically controlled pneumatic systems and / or serial control systems already used in all manufacturing sectors.
They have been designed to be easily assembled into groups or manifolds and include integral electrical connection to facilitate simple and speedy integration into a control system.
The 2400 series comprises a range of products classified according to the body size of 18mm divided into 3 types “LINE”, “FLAT” and
“VDMA”.

SERIES 2600 LINE-FLAT-VDMA

They have been designed to be easily assembled into groups or manifolds.
The 2600 series comprises a range of products classified according to the body size of 26mm divided into 3 types “LINE”, “FLAT” and “VDMA”.

888 SERIES

Competitively priced, good performance and versatility combined with a compact design are the main characteristics of this new series of valves.
The aluminium valve body and spool/seal arrangement optimize both the flow rate and the valve switching time.
This series of valves are available with G1/8” and G1/4” ports in 3/2, 5/2 and 5/3 versions.
Monostable or bistable versions are available and include an integrated technopolymer solenoid operator with 9mm stem and built in manual override.

400 SERIES

These are 2 stage valves actuated electro-pneumatically. A serie 300 directly operated solenoid valve actuates pneumatically the principal power distributor.
This integrated system allows configurations of systems requiring very little space.
The pilot air is normally taken from the inlet port (autofeed) and the only actuating signal is electric.
The range of the solenoid valves, as far as dimensions and mechanical construction, is similar to series 200.